Friday, March 25, 2011
what is the correct 2.2L idle speed difference between Park and Drive (at full stop)
question to gen4 distributorless camry design owners ONLY
as in topic, I cannot seem to find answer to this question anywhere, so thought maybe guys with properly running 2.2L camrys (automatic transmission, California emission specs car 2000 or 2001) could give the right answer based on own properly running cars.
per FSM 5s-fe specs (gen4) the idle speed in Park or Neutral should be 700+/-50, but it doesn't say when (normally) the same idle speed should be while car is in Driving gear and at full stop.
mine are currently** at:
a) 730ish rpm at hot* idle in Park
b) 660ish rpm at hot* idle in Drive gear (at full stop).
*by hot idle, I mean car is fully warmed up, e.g. after 30 mins highway driving or 1hr locally.
** all electrical accessories OFF, though I had parking lights on (headlights off)
what are yours at?
thanks.
I am mostly looking for numbers from 2.2L gen4.5 00-01 camry owners (or solara gen1 00-01) with California emission specs.
Federal specs might give a tad different numbers (DIFFERENT ECU and upstream oxygen sensor), same about California specs gen4.0 camry (97-99) or solara gen1 '99 that had a 3rd IAC port with Air Assist tube to fuel injectors (California emission spec'ed 00-01 do not have it).
best if someone could read them off the OBD2 scanner.
Tire rollout, mpg, speed, odo confusion HELP
Can't get my head around this thing. Every time I think I've got it confusion sets in. Also, lack of info probably too, lol. Not really looking for a "they are all close enough" or "the slight difference will not make any significant..." type answers. Wanting to know the correct way of logicing this thing out.
First, not going to massive wheels and tires and needing to know the max that will fit etc. The dilemma is replacing stock size with stock size and the varying specs.
05 Camry xle. 215/60/16 tires. Came with Bridgstone RE92 that show a roll out of 798 revs per mile.
Have Sumitomo Touring LSV on there now (came with the car when I bought it) that need replacing due to a camber problem on the driver rear tire causing the inner tread band to wear (whole other question as not found the issue causing it yet). Can't find exact specs on these, but close as I can tell from specs I've looked at, these tires have 811 revs per mile roll out. Now this could be an error and I guess I need to go out and actually try to measure, but basic logic questions below are the same either way I believe.
On trips with gps our speed on the speedometer is showing a little over 1 mph faster than we are actually going.
So, here is the question/confusion area.
Tires I've been looking at on Tire Rack have roll outs listed anywhere from 792 to 800.
I don't have data on how accurate the Bridgestones would have been on speed showing and actual odo miles covered. My thinking is that if the Sumitomos are 811 rpmile then the GPS should be showing that I am moving faster than the speedo indicates. Am I thinking the right direction on this?
Also, the odo would be showing less miles covered than actual. Am I in error?
One wonders if a closer mph speedo error could be dialed using the different roll out numbers, but then which way to go? (know it will probably be very little difference, but my question remains, as enquiring old minds want to know. Well at least mine does)
I'm also assuming that if the roll out on the tire can bring the speed in mph showing on the speedo closer then the actual odometer distance covered should be calculated closer to true. Correct or am I way off on this?
My guess logic right now is saying that at 811 my odo miles is showing less than it should be. Thus my mpg should be higher as I'm actually covering more ground than shown(not really supported by the gps numbers though that show 1mph slower than speedo indication)?
If I go to a smaller tire roll out then what happens...................? My speed slows down even more than what is indicated when compared to the GPS? What happens to the odometer reading. Does it end up showing more miles than actually covered and so I then get an inflated mpg?
Someone please edumacate me.
Reply 1 : Tire rollout, mpg, speed, odo confusion HELP
You can try this:
http://www.miata.net/garage/tirecalc.html
I'm using 225/45/18 tires. My speed is about 0.5 mph lower than the actual speed when I'm travelling at 60 mph. I'm happy about this since I'm sure I'm not overspeed.
PS: Don't rely on the speed meter on the road as an exact measuring tool.
Reply 2 : Tire rollout, mpg, speed, odo confusion HELP
Thanks for the post and calculator. I'll keep it bookmarked. Only calculates the numeric on a tire size or compares different size tires though, but still handy.
Looking at the same size tire 215/60/16.
Various manufacturers and models within their lines have different specs listed though for revs per mile. That is what I'm zeroing in on.
Effect of a same designated sized tire, but with say one listed by the manufacturer supplied spec at 790 revs compared to one listed at 800 say.
What does going from one number to a lower number do to the speedo reading and odometer reading (effects how fast you are actually going and also effects mpg calculations).
Any formulas/calculations for determining this that anyone knows of?
Thanks again for your post!
Cheers
Reply 3 : Tire rollout, mpg, speed, odo confusion HELP
Lets say you're going FROM a tire that rolls 811 times per mile TO a tire that rolls 800 times per mile.
In this example, simply divide the difference in revolutions (11) by the smaller number. 11 divided by 800= .01375 or 1.375% The speedo will now be reading faster by 1.375%. Example: 65mph X .01375= .89375mph. Now your speedo will be reading 65.89375. Not a big difference. The odometer will also be reading 1.375% more miles. A 300 mile trip now would be 300 X .01375= 4.125 or 304.125 Your gas mileage would "improve" unless you factor in the small odometer error.
Reply 4 : Tire rollout, mpg, speed, odo confusion HELP
Lets say you're going FROM a tire that rolls 811 times per mile TO a tire that rolls 800 times per mile.
In this example, simply divide the difference in revolutions (11) by the smaller number. 11 divided by 800= .01375 or 1.375% The speedo will now be reading faster by 1.375%. Example: 65mph X .01375= .89375mph. Now your speedo will be reading 65.89375. Not a big difference. The odometer will also be reading 1.375% more miles. A 300 mile trip now would be 300 X .01375= 4.125 or 304.125 Your gas mileage would "improve" unless you factor in the small odometer error.
Storage Box
Has anyone bought one of the hitch storage boxes from Thule or Stowaway? They are pretty pricey and it's hard to tell if one is better than the other. I am going to need one for vacation this year because my HL doesn't have the same storage as my 2002 Denali XL had.
Love the truck, bought a 2008 Sport that was loaded. I loved the Denali too, but didn't like the gas mileage
Thanks
Reply 1 : Storage Box
After reading a lot on these forums, it seems that if you have the factory cross bars, there may be issues with the factory cross bars supporting the weight of the box because of their flex.
It seems that most have gone with the aftermarket (thule/yakima) cross bars which are stronger (but aren't flush like the factory ones). Also search for the right size one because the longer boxes might be in the way of your rear gate.
Reply 2 : Storage Box
Thanks, but I am talking about the storage boxes that slide into the hitch
Accident on my 2010 Corolla *update*
loing story short..i got into an accident sunday morning 12 am as i got out of work. I stopped for a pedestrian and as pedestrian was crossing the street..some sob slammed into my car and left the scene.. today tuesday, i got a quote on the accident and was told it was over 12k in damages and my cars current value is set to 17k the adjuster still has to determine if the car is really a total loss..
no air bags were deployed just the whole front was messed up. This is an updated pic of the accident as of today (pictures are more detail this time)
still cant believe what happened to me..if the car is a total loss i still have no clue what car to get im considering getting another corolla but not the 2011 model..
Reply 1 : Accident on my 2010 Corolla *update*
^^^ aw man what a shame. some people man. well you cant really go wrong with the corolla
just depends on what you're looking for.
Reply 2 : Accident on my 2010 Corolla *update*
Hope they total it and you get a new car out of it,who knows what will go wrong down the road with $12000 worth of damage
Reply 3 : Accident on my 2010 Corolla *update*
the car is currently at the toyota dealership at my area i lucked out at my choice of body shop bc they fix cars directly for toyota..once the body shop fixed the body of the car then toyota service will fix the inside components (i lucked out) hopefully they will fix it and or give me the opinion to just choose a car simular to the corolla and keep the same monthly payments..
aside from all that if i do get a new car i gotta settle for new hids and tints
Reply 4 : Accident on my 2010 Corolla *update*
That does suck but I wouldn't want the car to be fixed with that much damage. I was at the dealer today getting some parts for my Previa & I saw a 2011 CSM S that looked very nice. My biggest complaint is the chrome strip on the trunk & the taillights but the chrome trim didn't stand out to badly on the CSM. I would have no problem owning it. I would miss the power port though in the center console as I use that all the time & no JBL option.
Other than that I thought it looked great other than the 4x4 stance. Reply 5 : Accident on my 2010 Corolla *update*
OMG get a 2011 scion TC same price as corolla !! then we can trade! you take my corolla and il take your TC
'86 22R 'Cold start' injector..'sender'
Hi, on my '86 22re pu, there are 2 senders on the water jacket. One is for 'cold start injector', and the other one, (bigger wrench size), I asume goes to 'computer'. The CS injector, after checking through manual 'tests' , shows nothing, so I assume..'dead'! I have a new one on order, but..if it is bad, it should not 'heat' up..so therefore there will always be a 'cold' signal sent, but then, should not the CSI, always be running? And if it is, Can I listen 'somewhere' in the system for a 'sound' that it is? CSI, does not 'help' the start up system, because when I start motor, it takes 5 or 6 cranks, and then has to be "throttle blipped', to keep motor up to 'work' loads. Other '(bigger wrench size) FI 'sender', checks out ..good! Looking for help to 'wrap' my head around this, and find a fix! "readings" on CSI, at injector, are as manual says!
Thanks
Syd
Reply 1 : '86 22R 'Cold start' injector..'sender'
One coolant temp sender is for the EFI, the other is for the gauge.
The CSI is controlled by the CSI timer, it does not run continuously.
Stiff automatic trans shifter.
The shifter on my '05 Taco double cab 4X4 has been getting stiffer when going from park to drive. This causes the check engine light to come on and then the cruise control will not work. I sprayed the linkage with wd-40 and worked it back and forth to free it up. This works for a while, but the problem has returned. The linkage boot is not damaged. I had the dealer clear the transmission code once. I assume warranty will cover this.
Anybody else having the same problem?
Reply 1 : Stiff automatic trans shifter.
i haven't heard of that problem before. i would definitely have the dealership take care of it before it's past the warranty
Reply 2 : Stiff automatic trans shifter.
My 2005 V6 4.0 liter automatic dbl cab has done the exact same thing at 120K miles. Tought it might be either park neutral park adjustment / alignment or even problem w/ fluid flow. It has been cycling b/t good and bad and now am exrta careful to watch slector light on dash.
Any news from anyone??
DUAL XNBP12D subs make lights, light up Help!
I have the subs(topic), its connected from the factory subs of my '00 toyota Avalon (with jbl premium sound and built in factory amp). without using the aftermarket amp. I want the lights (its built-in with the subs) to light up with the beats. But there are 2 black and red wire (pic below) its connected to the aftermarket amp that i am not using. So what do i have to do to make the it light up with the beat? Thanks!
Reply 1 : DUAL XNBP12D subs make lights, light up Help!
I moved this to the Audio, Video and Security - Tech forum. You're much more likely to get the help you're looking for there than in the Avalon-specific forum. But there's a redirect for anyone that might go looking for your thread in that forum.
Subscribe to:
Posts (Atom)